TSR 0.5-2465SM

Non-Isolated DC/DC Converter (POL) • • • • • TSR 0.5SM Series, 0.5 A Compact SMD package Very high efficiency up to 97% Excellent line / load regulation Low standby current Operating temperature range –40 to 90°C • Over-temperature and short circuit protection • • • Remote On/Off input • 3-year product warranty Adjustable output voltage TSR 0.5SM is a series of step-down non-isolated switching regulators in compact SIP package. These converters are an ideal alternative to LM78 linear regulators when energy efficiency is a parameter of the design. The high efficiency up to 97% allows full load operation up to +80°C (+90°C with 50% load) ambient temperature without the need of forced air cooling. Excellent output voltage accuracy and low standby current are other features that distinguish switching regulators from linear regulators. Moisture sensitivity level 2 as per IPC J-STD-033C Models Order Code Output Current Input Voltage Output Voltage Efficiency max. Range nom. (adjustable) typ. TSR 0.5-2415SM 1.5 VDC (1.4 - 2.5 VDC) 73 % (at Vin min.) TSR 0.5-2418SM 1.8 VDC (1.5 - 3.0 VDC) 82 % (at Vin min.) 2.5 VDC (1.5 - 3.0 VDC) 87 % (at Vin min.) 3.3 VDC (3.0 - 5.5 VDC) 91 % (at Vin min.) 4.75 - 32 VDC (24 VDC nom.) TSR 0.5-2425SM TSR 0.5-2433SM 6.5 - 32 VDC (24 VDC nom.) 5 VDC (3.0 - 8.0 VDC) 94 % (at Vin min.) TSR 0.5-2465SM 8 - 32 VDC (24 VDC nom.) 6.5 VDC (3.3 - 11.0 VDC) 95 % (at Vin min.) TSR 0.5-2490SM 11 - 32 VDC (24 VDC nom.) 9 VDC (4.5 - 12.6 VDC) 96 % (at Vin min.) TSR 0.5-24120SM 15 - 32 VDC (24 VDC nom.) 12 VDC (4.5 - 13.5 VDC) 97 % (at Vin min.) TSR 0.5-24150SM 18 - 32 VDC (24 VDC nom.) 15 VDC (4.5 - 15.5 VDC) 97 % (at Vin min.) TSR 0.5-2450SM Note 500 mA - For input voltage higher 28 VDC an input capacitor of 22 µF is required www.tracopower.com September 20, 2023 Page 1 / 4 TSR 0.5SM Series, 0.5 A Input Specifications Input Current - At no load Surge Voltage Recommended Input Fuse 5 mA typ. 34 VDC max. (1 s max.) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor 1.5 W max. Input Filter Short Circuit Input Power Output Specifications Output Voltage Adjustment 1.5 Vout models: 1.8 Vout models: 2.5 Vout models: 3.3 Vout models: 5 Vout models: 6.5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: See application note: Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (10 - 100%) Ripple and Noise (20 MHz Bandwidth) Capacitive Load Minimum Load Temperature Coefficient Short Circuit Protection Transient Response 1.5 Vout models: 1.8 Vout models: 2.5 Vout models: 3.3 Vout models: 5 Vout models: 6.5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: - Response Deviation - Response Time 1.4 - 2.5 VDC 1.5 - 3.0 VDC 1.5 - 3.0 VDC 3.0 - 5.5 VDC 3.0 - 8.0 VDC 3.3 - 11.0 VDC 4.5 - 12.6 VDC 4.5 - 13.5 VDC 4.5 - 15.5 VDC (By external trim resistor) www.tracopower.com/overview/tsr0-5sm ±3% max. 0.2% max. (9, 12 & 15 Vout models) 0.4% max. (other models) 0.4% max. (9, 12 & 15 Vout models) 0.6% max. (other models) 30 mVp-p max. 30 mVp-p max. 30 mVp-p max. 30 mVp-p max. 30 mVp-p max. 30 mVp-p max. 40 mVp-p max. 40 mVp-p max. 40 mVp-p max. 220 µF max. Not required ±0.015 %/K max. Continuous, Automatic recovery 2% max. (50% Load Step) 100 µs max. (50% Load Step) EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity External filter proposal: Air: - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: EN 55032 class B (with external filter) FCC Part 15 class B (with external filter) EN 55032 class B (internal filter) FCC Part 15 class B (internal filter) www.tracopower.com/overview/tsr0-5sm EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-3, 3 V/m, perf. criteria A EN 61000-4-4, ±0.5 kV, perf. criteria A Nippon chemi-con KY 330 µF, 100 V EN 61000-4-6, 3 Vrms, perf. criteria A EN 61000-4-8, 3 A/m, perf. criteria A All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TSR 0.5SM Series, 0.5 A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Over Temperature Protection Switch Off - Protection Mode - Measurement Point Cooling System Remote Control - Voltage Controlled Remote - Off Idle Input Current Switching Frequency Insulation System Reliability Moisture Sensitivity (MSL) Washing Process - Calculated MTBF Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 95% max. (non condensing) –40°C to +90°C +100°C max. –55°C to +125°C 5 %/K above 80°C See application note: www.tracopower.com/overview/tsr0-5sm 160°C typ. (Automatic recovery) Internal IC temperature Natural convection (20 LFM) On: 2.4 to 5.0 VDC or open circuit Off: 0 to 1.6 VDC or short circuit Refers to 'Remote' and 'GND' Pin 0.035 mA max. 280 - 380 kHz (PWM) 330 kHz typ. (PWM) Non-isolated 2'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Phosphor Bronze (C5191) Copper (1 - 3 µm) Tin (7.5 µm min.), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD10 Lead-Free Reflow Soldering (acc. J-STD-020E) See application note: www.tracopower.com/info/reflow-soldering.pdf 1.7 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) e0a18ff4-ad10-4a4c-9291-ed6dcd37c4d5 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tsr0-5sm All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TSR 0.5SM Series, 0.5 A Outline Dimensions 15.3 (0.60) (4x0.100) (0.101) 8 7 2 3 4 5 1.3 0.55 (0.051) (0.022) 9.24 (0.364) Pin Function 1 +Vin 2 +Vin 3 GND 4 +Vout 5 +Vout 6 Trim 7 GND 8 GND 0.10 S 6 Top view 1 0-4° 12.35 (0.486) 9 S Seating plane (0.02) 2.57 9.6 (0.38) 10 4x2.54 0.44 8.8 (0.35) Pinout Dimensions in mm (inch) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) 9 GND 10 Remote On/Off Pin tolerances: ±0.05 (±0.002) Pin pitch tolerances: ±0.25 (±0.01) Recommended Solder Pad Layout 6x2.54 9 8 7 6 1 2 3 4 5 2.1 1.2 (0.05) (0.08) 13.8 10 (0.54) (6x0.10) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4